The Fastest Way to Paint Wood Siding
Exterior wood siding offers several advantages. It is long-lasting and certainly adds a personality to your home. Yet, you could get intimidated when it comes to painting and repairing wood siding panels. There’s no need for that. We’re here to help you to paint wood siding! We’ve done our homework and created step-by-step guidelines to make your siding look brand new! Read to find out how you can paint wood siding.
Different sidings can be more common in other regions, like how pine grows quickly and widely in North America. The far more popular hardwoods for wood siding in Canada are cedar and redwood. Also, modern wood sidings are more popular.
These are the different wood siding options, which are listed below:
- Wood Fiber Cement Siding
- Pine Siding
- Cedar Siding
- Shake Siding
- Engineered wood siding
- Redwood Siding
- Shiplap Siding
- Shingle Siding
- Split Log Siding
- Panels Siding
- Board and Batten
- Tongue and Groove
Although the majority of the time, a roller can be used to paint wood siding quickly, in the all-wood siding options, you must use a brush for corners and cracks.
Steps to the fastest way to paint wood siding:
- Clean the siding
- Prepare the surface
- Remove Loose Paint
- Repair Any Damage
- Tape it off
- Brush in the edges
- Roll the siding
List of the Materials to paint wood siding:
- Pressure washer
- Roller cage
- Metal brush
- Quality paint
- Painter’s tape
- 2 1/2″ angled brush
- Paint tray
- Good primer
- Wood putty
- Putty knife
- Roller cover
Steps to the fastest way to paint wood siding are explained as follows:
Wash the Cladding Before You Paint Wood Siding:
Before you paint wood siding, be sure it is clean. Use a hose or a garden sprayer on a low setting to clean your siding correctly.
If mildew and mold are detected, fill your sprayer with a cleaning solution. Please make sure that it is designed for use on wood. Let your siding dry thoroughly before proceeding to the next step.
Before Painting Wood Siding, You Need Preparation:
Proper preparation is the secret to a flawless, long-lasting paint job on wood siding. As a result, this is a critical step in painting the wood siding.
Remove Loose Paint:
Loose, flaking, or damaged paint is a poor base for new paint. It’s not only unattractive, but it’ll deform and take a fresh coat of paint.
Scrap any loose or flaking paint from your siding with a wire brush. Afterward, wipe or brush the area to eliminate dust and dirt.
Repair Any Damage Before You Paint Wood Siding:
It is critical to repair wood siding with any decaying or cracked parts before doing the paint on the wood siding. Remove any rotten wood and replace it. Wood putty or resin filler should be used to fix all cracks and holes.
Caulking is the final step in prepping to paint the wood siding. Caulk around windows, doors, and anything else that must be sealed. Remove any defective caulk, clean and dry the area, and replace it with new caulk.
Tape the Wood Siding Off:
The next step in painting wood siding is to tape off any sections that will not be painted. Vents, trim, doors, and windows are just a few areas that should be taped off.
This step is only required if you are to paint new wood siding or repair or replace siding. Allow it to dry after applying a quality primer to any raw wood. This is required to seal the new wood and assist in correctly bonding the paint to the siding.
Brush in the Edges:
Sadly, it is not always possible to paint wood siding with merely a roller. With a roller, applying a uniform coat of paint to places such as corners and overlapping panels is difficult.
Use a paintbrush to cut around trim, windows, vents, and corners. Scrape around windows, vents, corners, and underneath any overlapping boards with a paintbrush.
Roll Paint the Siding:
With all of the preparation work completed, it is time to paint the wood siding! A paint tray or roller pan is required when painting with a roller. Fill your roller pan with paint, making sure you replace the paint cover to prevent drying.
Fill your roller by sinking it into the well in the roller pan, and then glide it across the textured area to remove extra paint. Begin rolling your siding from the top and work your way across and down. Divide the house into segments and paint the wood siding one part at a time.
A roller extension pole or a ladder can be used to paint wood siding in higher regions. After painting the entire house, let it dry for at least two hours before adding the second coat.
Is Rolling or Spraying Wood Siding Better?
To paint wood siding, spraying & rolling your wood siding have advantages. Rolling paint spreads a thicker, more uniform, and more accurate coating. Rolling also involves less arrangement and cleanup than spraying, which needs considerable masking, tape, and cleaning.
What Is the Best Season to Paint Wood Siding Panels?
To dry properly and uniformly, paint requires low humidity, mild temperatures, and dry weather. Summer, in general, will provide the most favorable climate for painting wood siding, as long as no rain is forecasted and temperatures do not surpass 100 degrees F (38 degrees Celsius). The higher the humidity, the slower your color finish on exterior wood siding will dry.